Sicoma concrete mixers have an excellent reputation. Many people have been able to use these mixers satisfactorily. With that said, there are a few things you should know before you start using your device. If you have the right knowledge, it will be easier for you to use your concrete mixer without any issues.
Always Read The Manual
Don’t start using the mixer until you have read through the operation manual. This manual should be delivered to you alongside the mixer. If you read over the manual, you’ll be able to learn a lot of things.
Manuals tend to be long, and they are packed full of information that is difficult to digest. Because of this, it can be smart to read the manual one section at a time.
Finish one section of the manual, then take a break before you move on to the next section. This will make it easier for you to process all of the information that you need to.
Clean Your Mixer Properly
Concrete mixers get very dirty very quickly. Because of this, you will need to make sure that you clean your mixture properly after each use.
Once you have finished using your mixer, you should clean it using a high pressure washer. Make sure that you clean every part of the mixer; don’t ignore the discharge shoot.
Your mixer can not function properly unless it is clean. Give your mixer a through cleaning whenever there is a break in concrete production.
Check The Mixer Before Using It
Don’t turn on your mixer without checking it carefully. Make sure that the mixer is completely empty; if there is any waste on the mixer’s floors or walls, it could lead to an issue.
In some cases, your mixer may have a layer of build-up. If this has happened to you, you will need to get rid of the build-up before you turn on the mixture. Pressure washing is the best way to eliminate build-up and keep your mixer clean.
If you suspect that there is a problem with your mixer, don’t turn it on. If you run a faulty mixer, you could wind up turning a small issue into a major problem. Click http://aimixconcretemixer.com/sicoma-concrete-mixer/ to know more about Sicoma concrete mixer.
Maintenance
Mixers need a lot of maintenance. Producing concrete can place a lot of strain on a mixer. If you want your mixer to last for a long time, then you will have to give it extra care.
You should regularly grease the nipples on top of the gear box. You should also take the time to check the tightness of the bolts as well as the tension on the drive belts. Make sure that your hydraulic oil level is where it needs to be. Keep an eye on your mixer; you want to keep it in the best possible condition.
As you can see, there are many things you should know before you start using Sicoma mixers. Make sure you are using your mixer appropriately. If you want know more about concrete mixer,